Crystal Reports - Design
Formatting the detail section to display multiple columns
Format the details section to display in multiple columns:
1. Right-click on the Details section, to open the Section Expert dialog box.
2. On the Sections list, click the details section.
3.On the Common tab, select Format with multiple columns check box. A new tab called Layout appears.
4. On the Layout tab, specify the formatting for the columns: Enter the width of the column in the Width box (you can set the height by dragging the section borders in the Design view of the report).
5. Enter the space between labels going across the page in the Horizontal gap checkbox.
6. Enter the space between labels going down the page in the Vertical gap box.
7. Select the printing direction, Across then Down or Down then Across.
If the report is grouped, and you would like the group headers and footers to display in multiple column format as well, select the Format groups with multiple columns checkbox and click ok.
Final Results:
Great!,
But i have a question, is it possible to display data like this?
For example I have a result set of 6 records and I want to show something like this:
Rec1 Rec4
Rec2 Rec5
Rec3 Rec6
and if I have a result set of 10 records show something like this
Rec1 Rec6
Rec2 Rec7
Rec3 Rec8
Rec4 Rec9
Rec5 Rec10
Display only showing two columns? Or an even amount in each column?
I want to format the details section to display in multiple columns at runtime. I am using .NET RAS SDK.
Anyone please reply if you have solution for that.
Thanks.
thanks for you support
crystal report barcode printing runtime vb.net
how to format the details section to display in multiple columns under group? i want it like this:
Group1
———————————————————————————————————————————-
Group2 Group2
fldName1 fldName2 fldName3 fldName1 fldName2 fldName3
Rec Rec Rec Rec Rec Rec
Rec Rec Rec Rec Rec Rec
Rec Rec Rec Rec Rec Rec
I am very new to Crystal Report 2014 and have minimal training. I need to know how to do the following: I have 2 tables LEGSUM & LEGDTL. My current report returns records with each record having an Active Date & Last Position Date. Each record is either a P (DTL.LD_PL) type or a D time. I need only the Active Date on P records and only Last Position Date on D records to display. And then I need a separate field to calculate the days between those 2 dates. Below is a sample of what I am currently getting. In the scenario below, I want the Active date of 2/2/16 on leg 2 and the Last Position date of 3/3/16 on leg 4. This report is for calculating the number of days the chassis has been out from 2/2 thru 3/3. Any help would be appreciated
Trip Leg Active Date Last Position Date Chassis LD_PL
1012 2 2/2/16 3/3/16 aplz111000 P
1012 4 3/3/16 3/3/16 aplz111000 D
can we change this format with multiple columns?